Skip to Main Content
Mon - Fri 8am - 5pm
American Seals West Logo

Gasket Materials

We offer an extensive range of non-asbestos, calendered gasket materials, suitable for most applications. Our gasket materials are easy to cut, handle and fit to your needs.

Compressed Fiber Reinforced Gasket Materials

Klinger Thermoseal Logo

KLINGERSIL® C-4401

Klingersil C-4401

KLINGERSIL C-4401 is a universal gasket material for use in a wide range of applications. The general purpose gasket material creates an excellent seal and it is chemical resistance.

This material is manufactured with aramid fiber, reinforced with a nitrile binder.

Download C-4401 Datasheet

KLINGERSIL® C-4433

Klingersil C-4433

KLINGERSIL® C-4433 is the ultimate steam sheet gasket material. It is excellent at higher temperatures, has outstanding load-bearing properties and offers excellent creep relaxation properties. This all-purpose gasket material’s range of applications is expanded for most petroleum-based media such as lubrication and hydraulic oils, solvents, and natural gas.

This material is manufactured with a combination of fiberglass and aramid and inorganic fibers, then reinforced with a nitrile binder.

Download C-4433 Datasheet

KLINGERSIL® C-4439

Klingersil C-4439

A high performance steam sheet with metal reinforcement

KLINGERSIL® C-4439 is an excellent high-performance material for use in high temperature and high-stress applications. The expanded metal reinforcement is a galvanized low carbon steel insert which makes this material suitable when vibrations are present.

This material is manufactured with a combination of fiberglass, aramid, and inorganic fibers, reinforced with a nitrile binder.

Download C-4439 Datasheet

Teadit Logo

Teadit Style NA-1100

Teadit NA-1100 Gasket Material

Compressed Sheet with Carbon Fiber, NBR Binder

TEADIT style NA-1100 is a universal jointing sheet with high temperature and pressure resistance, manufactured from graphite and carbon fiber, bonded with Nitrile rubber (NBR). It is being manufactured by means of a hot calender process. TEADIT maintains a quality management system that is certified according to DIN EN ISO 9001.

For anti-stick purposes is the surface equipped with a special graphite finish. TEADIT style NA-1100 is suitable for sealing petroleum derivatives, water, saturated steam, solvents, gases and chemical products in general.

Download NA-1100 Datasheet

Style NA-1100 is suitable for service handling the following general media categories:

  • Water
  • Saturated Steam
  • Gases
  • Petroleum Derivatives
  • Solvents
  • Chemicals

Teadit Style NA-1085

Teadit NA-1085 Gasket Material

Compressed Sheet with Aramid Fibers, CSM Binder

Teadit Style NA1085 gasket material is a severe service compressed fiber sheet that is specifically formulated to provide an effective seal against most acids in the process industries.

Style NA1085 is a compressed fiber sheet gasket material produced from aramid fibers and bonded with CSM rubber. It is manufactured through the hot calendar process under rigorous quality control standards that are registered under ISO-9001 certification.

Download NA-1085 Datasheet

Style NA1085 is suitable for service handling the following general media categories:

  • Air
  • Water
  • Brine
  • Refrigerants
  • Saturated Steam
  • Industrial Gases
  • Oxygenated Solvents
  • Neutral Solutions
  • General Chemicals
  • Diluted Alkalis
Teadit NA-1001 Gasket Material

Compressed Sheet with Aramid Fibers, NBR Binder

TEADIT Style NA1001 is a very good general service gasket material that has numerous applications in the process industries and in the water and wastewater industry. It is also commonly used in equipment such as valves and pumps.

Style NA1001 is a compressed fiber sheet gasket material produced from a combination of aramid and other synthetic fibers and bonded with nitrile rubber (NBR). It is manufactured through the hot calendar process under rigorous quality control standards that are registered under ISO-9001 certification

Download NA-1001 Datasheet

Style NA-1001 is suitable for service handling the following general media categories:

  • Air
  • Water
  • Brine
  • Animal oils
  • Refrigerants
  • Vegetable oils
  • Synthetic oils
  • Industrial oils
  • Diluted Alkalis
  • Aliphatic solvents
  • Mild organic acids
  • Mild inorganic acids
  • Vegetable Solutions
  • Petroleum and Derivatives
  • General Chemicals

Teadit Style NA-1035

Teadit NA-1385 Gasket Material

Compressed Sheet with Aramid Fibers, CSM Binder

Teadit Style NA1035 is a very good general service SBR binder based gasket material that has numerous applications in the process industries handling media like; mild acids and alkalis, water, brine, saturated steam, air, industrial gases, general chemicals, neutral solutions.

Style NA1035 is a compressed fiber sheet gasket material produced from a combination of Aramid Fibers, Inorganic Fillers and bonded with Styrene-Butadiene Rubber (SBR). It is manufactured under rigorous quality control standards that are registered under ISO-9001 certification.

Download NA-1035 Datasheet

Style NA1035 is suitable for service handling the following general media categories:

  • Air
  • Water
  • Brine
  • Saturated Steam
  • Industrial Gases
  • Mild Acids
  • Neutral Solutions
  • General Chemicals
  • Mild Alkalis

Service areas

American Seals West services all of the United States of America & Canada.

Copyright© American Seals West, Inc.